Description
Replacement spare parts for Grizzly 180 Chipper
Reversable blade
Length: 115mm
Height: 1 cm
Width: 75mm
Two fastener holes
Price is per blade- Grizzly 180 takes 4 blades. When replacing a blade – the opposite blade should always also be replaced.
Remember to always sharpen blades at a 45º angle when resharpening
The rotor and ledger blades need to be sharp for the Chipper to perform as expected. Periodic inspection is recommended. Keep the blades sharp to reduce the amount of power required during operation.
Watch the sharpness of the blades when processing material with a lot of sand, soil or dirt mixed with it. Reverse or sharpen the blades if the cutting edge becomes dull.
The rotor is equipped with 4 blades spaced evenly to keep the rotor in balance. If one needs to be changed, the one opposite should also be changed.
It is recommended that the rotor blades be removed from the rotor when sharpening. Always sharpen the blades at a 45° angle to provide the best cutting effect as it meets the stationary blade.
Be sure to tighten the blade mounting bolts to their specified torque when re-installing the blades to the rotor.
